eXp Realty

            Setting an Additional Address in kvCORE

            The office address listed in each site's footer may not represent the exact area an agent is located.  This is due to office addresses representing IDX feeds or specific information due to compliance requirements rather than physical locations.  While this is necessary to ensure states (along with agents and brokers) remain in compliance, it can cause frustration for agents and confusion for clients. 

            With this setting, agents can add an additional address underneath the office address.  This address will allow agents to show a specific location that reflects their coverage area so clients won't be confused by a conflicting office address.  

            This feature may not be allowed in all states/MLSs.  Verify with your DMB before adding an additional address to ensure your site will be in compliance.  





            1.  To set a secondary address, first navigate to the Web & IDX area of kvCORE.  This is found on the left-hand side gray bar.  

            2.  Once that area loads, you should see your URL listed on the screen.  Click Edit Website Settings underneath your URL/information.

            3.  Scroll down until you find the Additional Address section.  Enter the desired information and click the blue SAVE button. 

            4.  Allow some time for the change to reflect on your site.  If corrections need to be made or the address needs to be removed, just repeat the process.


            Here's an example of how the address will appear on your site.
              


            Helpful?  
            Help us to make this article better
            0 0